FASTART

FORMULA THREE

"Automatic Transmission Blend.

Every user of FASTART is a Winner!

FASTART FORMULA THREE is a special formula that restores and prevents operating failure in most automatic transmissions by reducing line clogging, friction, heat, oxydation, acid, sludge, varnish and gum build-up and foaming. Valves and fluid lines are cleaned and fluid stays in condition to perform. FORMULA THREE provides components to prevent damage to elastomeric parts seals and plastic parts. The high viscosity index permits use of a wide temperature range by providing excellent low temperature fluidity and at the same time retaining the desired viscosity at higher temperatures.

When added to the transmission FORMULA THREE will:

FORMULA THREE Automatic Transmission Blend is available in:

or in industrial sizes of:

Directions for use:

12 fl oz/360 ml automotive bottle:
Add contents to any automatic transmission every 40,000 km/25,000 miles or at manufacturers recomended intervals. Do not over fill transmission, leave room for addition of FORMULA THREE Automatic Transmission Fluid.
Industrial blending of concentrated FORMULA THREE:
This unique formulation integrates with all types of fluids and brands. Unit should be at operating temperature, drain through the filler tube the same amount of fluid as you are going to use on a ratio of one ouce of FORMULA THREE to each 10 ounces of AT fluid capacity of the transmission reservoir. Do not overfill. Re-treat at service interval recommended by manufacturer or filter change.
ALL RATIOS ARE BASED IN OUNCES OF BASE LINE PRODUCT REQUIRED AS MANUFACTURERS SPECIFIES FOR LUBES CAPACITIES AND INTERVALL OF LUBE CHANGES, BASE EXTENDED LUBE INTERVALS ON OIL ANALYSIS IF DESIRED.

If only the BEST will do FASTART is the only CHOICE.


® FASTART is a trademark of Beslub International Ltd.