FASTART

FORMULA FOUR

"MOLY GEAR LUBE BLEND"

For:

Every user of FASTART is a Winner!

FASTART FORMULA FOUR is a concentrated multi-viscosity gear lubricant containing Molybdenum Disulfide in proper quantity to withstand pressures to 500 000 pounds per square inch and temperatures to 750 degrees F. It has a superior colloid to suspend MOLY to surpass any and all gear lube.Preventing metal to metal wear on friction surfaces lowers operating temperatures, lowers noise levels and gear drag reducing the energy required to use the equipment or vehicle. Used as directed you can forget problems pertaining to maintenance of your standard transmission, differentials power dividers, gear boxes, axles and bearings protected by FORMULA FOUR.

FORMULA FOUR will:

FORMULA FOUR provides protection that meets or exceeds MIL-L-2105 C and API service classification GL-2 to GL-5 for todays high performance transmissions, axles, differentials and power dividers. Prevents peening, chipping, pitting, cracking and abrasions as MOLY cushions the gear teeth that stops metal to metal friction and wear.

FORMULA FOUR is available in:

or in industrial sizes of:

Directions for use:

8 fl. oz/240 ml automotive bottle:
FORMULA FOUR integrates with any SAE weight and viscosity ogf gear oil. The transmission or differential should be warm to draw out ample gear oil from the gear box, allowing for the addition of FORMULA FOUR. Blend 30 ml of FORMULA FOUR for each 300 ml/1 ozfor each 10 oz of gear oil in the system you are treating. There is no need to retreat unless the vehicle is older and the gear oil has not been known to have been changed since its manufacture.
Industrial blending of concentrated FORMULA FOUR:
This Molybdenum formula integrates with any viscosity of SAE gear oil. No mixing or agitation is required as the MOLY is suspended in a colloidal providing adhesive and cohesive lubrication beyond normal lubes. The transmission, differential, gear box or power divider equipment should be at operating temperature prior to the draw off of the necessary lube to allow for the addition of FORMULA FOUR into the treatment casing. Ratio for treatment is one ounce of FORMULA FOUR to each 10 onces of gear lube in the system you are treating. There is no need to retreat.
ALL RATIOS ARE BASED IN OUNCES OF BASE LINE PRODUCT REQUIRED AS MANUFACTURERS SPECIFIES FOR LUBES CAPACITIES AND INTERVALL OF LUBE CHANGES, BASE EXTENDED LUBE INTERVALS ON OIL ANALYSIS IF DESIRED.

If only the BEST will do FASTART is the only CHOICE.

® FASTART is a trademark of Beslub International Ltd.